532nm Laser
CRYLINK’s 532 nm laser includes Dazzling laser, 532nm Narrow linewidth laser system, 532nm Active Q-switched sub nanosecond laser, 532nm Passive Q-switched Sub Nanosecond Laser, 532nm Single frequency continuous laser, 532nm Single frequency solid state laser and 532nm Microchip laser. Dazzling laser is mainly used in counter terrorism, anti demonstration and other scenes. Narrow linewidth lasers are mainly used in fluoronce spectrum detection. Single frequency CW laser is mainly used in titanium sapphire pump. Active Q-switched sub nanosecond lasers are mainly used in Doppler wind measurement, underwater imaging, point cloud imaging radar, laser for aerosol radar, laser remote sensing and other fields. Passively Q-switched sub nanosecond lasers are mainly used in terahertz generation. Microchip lasers are mainly used in laser micromachining, time resolved Raman spectroscopy, ultrasound imaging, laser induced breakdown spectroscopy, micromachining.
532nm Narrow Linewidth Laser
Narrow linewidth laser system is our special product. This series of products are compact in structure, portable and convenient. The core technologies such as short cavity method, VBG wavelength locking, directional optical feedback, built-in semiconductor refrigeration, etc. are used to realize narrow linewidth, stable power and stable spectral output of laser.
| Model | CL532-MIF(S)-50mW-NLM001 | CL532-MIF(FP)-50mW-NLM002 | |
| Optical Parameter | Central Wavelength (nm) | 532 | 532 |
| Wavelength Tolerance (nm) | ±0.5 | ±0.5 | |
| Output Power (mW) | 100 | 100 | |
| Line Width (nm) | <0.05 | <0.05 | |
| Wavelength Stability | ±5pm@4h Typ. | ±5pm@4h Typ. | |
| Power Stability | ±2%@4h Typ. | ±2%@4h Typ. | |
| Side Mode Rejection Ratio (dB) | – | – | |
| System Parameter | Power Adjustment Range | 0～100% | 0～100% |
| Preheat Time (min) | 15 | 15 | |
| Modulation Input- | – | – | |
| Control Interface | – | – | |
| Fiber Interface | SMA905 | FC/PC | |
| Adaptive Optical Fiber | 105µm，0.22NA | 105µm，0.22NA | |
| Power Input | +5VDC | +5VDC | |
| System Power Consumption | <20W Typ. | <20W Typ. | |
| Storage Temperature (℃） | 10～60 | 10～60 | |
| Storage Humidity | 0～80%RH | 0～80%RH | |
| Operating Temperature (℃） | 10～35 | 10～35 | |
| System Weight (Kg) | 1.2 | 1.2 | |
| System Size (mm) | 168×88×140 | 168×88×140 |
- Line width <0.1nm
- Frequency stability better than ±0.005nm@8H
- Side mode rejection ratio is better than 40dB (60dB optional)
- Portable operation, temperature drift <0.007nm / ℃, VBG wave lock
- Built-in TEC, power stability is better than ± 1.5%
- Including host computer control, emergency stop switch, short circuit protection and other functions
- Raman spectroscopy
- Fluorescence spectrum detection
- Holographic detection
- Up-conversion material
Microchip Laser
532nm Microchip Laser System of MA Series
MA series microchip laser is a passively Q-switched solid-state laser based on semiconductor pump. The laser pulse is pure without tail, the single pulse energy is stable, and the beam quality is good. The integrated design of semiconductor pump module and laser crystal makes the compact laser head easy to install and integrate. The system supports internal and external triggering. This series of products include four wavelengths of 1064nm, 532nm, 355nm and 266nm. The full sealing module inside the laser head can be used by customers for secondary development and application.
| Model | Repetition frequency (KHz) | Average power(mW) | Output energy(uJ) | Pulse width (ps) |
| CL532-1KHz-60μJ-MA009 | 1 | 60 | 60 | 1500 |
| CL532-2.5KHz-60μJ-MA010 | 2.5 | 150 | 60 | 1500 |
| CL532-1KHz-100μJ-MA011 | 1* | 100 | 100 | 1500 |
| CL532-2.5KHz-100μJ-MA012 | 2.5* | 250 | 100 | 1500 |
| CL532-5KHz-30μJ-MA013 | 5 | 150 | 30 | 1200 |
| CL532-10KHz-15μJ-MA014 | 10 | 150 | 15 | 1200 |
| CL532-20KHz-10μJ-MA015 | 20 | 200 | 10 | 1200 |
1. The optical outlet of the * laser head is a side outlet. For details, see the mechanical dimension diagram.
2. The built-in beam expanding function can be customized to meet the requirements of small divergence Angles (less than 2mrad).
3. MA010, MA011, and MA012 are specially designed for miniaturized weather radar applications. They are small in size, low in power consumption, and can be used in high altitudes, large temperature differences, and other subserve environments. This series accepts dual wavelength laser customization, such as 1064nm&532nm, 1064nm&355nm, or others.
- Pulse energy up to 200 μJ
- External pump source fiber pump pulse energy can reach 1.2mJ
- Repetition frequency up to 20kHz
- Beam mode is TEM00
- Fully sealed design, high reliability
- Lidar
- Optical Parametric Oscillating Pump Source
- Laser Ranging
- Laser induced breakdown spectroscopy
- Atmospheric monitoring
- Laser ultrasonic inspection
- Optical metrology
- Biomedical Science
- Laser ionization mass spectrometry
- Laser-induced fluorescence
- 3D scanning and imaging
532nm Microchip Laser System of MB Series
MB series microchip laser products have very ideal narrow pulse width, but also can achieve high single pulse energy. The product is a passive Q-switched solid-state laser based on semiconductor pump. The laser pulse is pure and tailless, the single pulse energy is stable, and the beam quality is good. The integrated design of semiconductor pump module and laser crystal makes the compact laser head easy to install and integrate. The system supports internal and external triggering. This series of products include four wavelengths of 1064nm, 532nm, 355nm and 266nm. The full sealing module inside the laser head can be used by customers for secondary development and application. The superior product performance index makes its application range very wide, especially in laser measurement, which can meet many different kinds of measurement needs, and also has excellent performance in the application of laser seeds.
| Model | CL532-1KHz-75μJ-MB004 |
| Wavelength(nm) | 532 |
| Repetition frequency (KHz) | 1 |
| Average power(mW) | 75 |
| Output energy(uJ) | 75 |
| Pulse width (ps) | 550 |
| Power stability (8h) | ±3% |
| Beam mode | TEM00 |
| Full-angle divergence angle Typ. (Mrad) level @1/e2 | 6 |
| Vertical @1/e2 | 6 |
| Polarization characteristics | ＞100:1 |
| System power consumption（W) | ≤25 |
| Power input | 100-240 VAC,50/60Hz |
| Control interface | RS232、USB |
| Power supply size (W×H×L, mm) | 168×88×140 |
| Laser head size (W×H×L, mm) | 45×30×120 |
| Working temperature (℃) | 15-35 |
| Storage temperature (℃) | 0-60 |
- Pulse energy up to 170μJ
- External pump source fiber pump pulse
- Charge energy up to 360μJ
- Maximum repetition frequency up to 1kHz
- Beam mode is TEM00
- Fully sealed design, high reliability
- Seed source
- Micromachining
- Biomedical Science
- Laser ultrasonic inspection
- Laser ionization mass spectrometry
- Non-linear optical measurement
- Laser-induced fluorescence
- Laser induced breakdown spectroscopy
532nm Microchip Laser System of MC Series
MC series microchip laser products have very ideal narrow pulse width, but also can achieve high single pulse energy. The product is a passive Q-switched solid-state laser based on semiconductor pump. The laser pulse is pure and tailless, the single pulse energy is stable, and the beam quality is good. The integrated design of semiconductor pump module and laser crystal makes the compact laser head easy to install and integrate. The system supports internal and external triggering. This series of products include four wavelengths of 1064nm, 532nm, 355nm and 266nm. The full sealing module inside the laser head can be used by customers for secondary development and application. The superior product performance index makes its application range very wide, especially in laser measurement, which can meet many different kinds of measurement needs, and also has excellent performance in the application of laser seeds. We can also provide 1064nm and 532nm isolators.
| Model | CL532-1KHz-50μJ-MC007 | CL532-5KHz-30μJ-MC008 | CL532-10KHz-15μJ-MC009 |
| Wavelength(nm) | 532 | 532 | 532 |
| Repetition frequency (KHz) | 1 | 5 | 10 |
| Average power(mW) | 50 | 150 | 150 |
| Output energy(uJ) | 50 | 30 | 15 |
| Pulse width (ps) | 700 | 700 | 700 |
| Power stability (8h) | ±3% | ±3% | ±3% |
| Beam mode | TEM00 | TEM00 | TEM00 |
| Full-angle divergence angle Typ. (Mrad) level @1/e2 | 7 | 10 | 10 |
| Vertical @1/e2 | 7 | 10 | 10 |
| Polarization characteristics | ＞100:1 | ＞100:1 | ＞100:1 |
| System power consumption（W) | ≤25 | ≤30 | ≤35 |
| Power input | 100-240 VAC,50/60Hz | 100-240 VAC,50/60Hz | 100-240 VAC,50/60Hz |
| Control interface | RS232、USB | RS232、USB | RS232、USB |
| Power supply size (W×H×L, mm) | 168×88×140 | 168×88×140 | 168×88×140 |
| Laser head size (W×H×L, mm) | 45×30×120 | 45×30×120 | 45×30×120 |
| Working temperature (℃) | 15-35 | 15-35 | 15-35 |
| Storage temperature (℃) | 0-60 | 0-60 | 0-60 |
- Pulse energy up to 80 μJ
- External pump source fiber pump pulse energy can reach 500μJ
- Repetition frequency up to 10kHz
- Beam mode is TEM00
- Fully sealed design, high reliability
- Seed source
- Micromachining
- Laser ionization mass spectrometry
- Laser ultrasonic inspection
- Optical Parametric Oscillating Pump Source
- Biomedical Science
- Laser-induced fluorescence
- Laser induced breakdown spectroscopy
532nm Microchip Laser System of MD Series
MD series microchip laser is a passively Q-switched solid-state laser based on semiconductor pump. The laser pulse is pure and tailless, the single pulse energy is stable, and the beam quality is good. The integrated design of semiconductor pump module and laser crystal makes the compact laser head easy to install and integrate. The system supports internal and external triggering. This series of products include four wavelengths of 1064nm, 532nm, 355nm and 266nm. The full sealing module inside the laser head can be used by customers for secondary development and application. This series of lasers have great advantages in seed light, laser micromachining, laser measurement and other applications. We also provide 1064nm and 532nm isolators.
| Model | CL532-1kHz-25μJ-MD003 | CL532-5kHz-5μJ-MD004 | CL532-10kHz-3μJ-MD005 |
| Wavelength(nm) | 532 | 532 | 532 |
| Repetition frequency (KHz) | 1 | 5 | 10 |
| Average power(mW) | 25 | 25 | 30 |
| Output energy(uJ) | 25 | 5 | 3 |
| Pulse width (ps) | 300 | 300 | 300 |
| Power stability (8h) | ±3% | ±3% | ±3% |
| Beam mode | TEM00 | TEM00 | TEM00 |
| Full-angle divergence angle Typ. (Mrad) level @1/e2 | 10 | 10 | 10 |
| Vertical @1/e2 | 10 | 10 | 10 |
| Polarization characteristics | ＞100:1 | ＞100:1 | ＞100:1 |
| System power consumption（W) | ≤25 | ≤25 | ≤25 |
| Power input | 100-240 VAC,50/60Hz | 100-240 VAC,50/60Hz | 100-240 VAC,50/60Hz |
| Control interface | RS232、USB | RS232、USB | RS232、USB |
| Power supply size (W×H×L, mm) | 168×88×140 | 168×88×140 | 168×88×140 |
| Laser head size (W×H×L, mm) | 45×30×120 | 45×30×120 | 45×30×120 |
| Working temperature (℃) | 15-35 | 15-35 | 15-35 |
| Storage temperature (℃) | 0-60 | 0-60 | 0-60 |
- Pulse energy up to 150 μJ
- External pump source fiber pump pulse energy can reach 360μJ
- Maximum repetition frequency up to 1kHz
- Beam mode is TEM00
- Fully sealed design, high reliability
- Seed source
- Laser micromachining
- Non-linear optical measurement
- Laser-induced fluorescence
- Laser ionization mass spectrometry
- Fluorescence lifetime measurement
532nm Microchip Laser System of ME Series
ME series microchip laser has the advantages of narrow pulse width, high peak power, good beam quality, and stable single pulse energy. Can provide a miniaturized circuit structure, low power consumption, compact size, and easy to integrate. The laser is fully sealed and protected by nitrogen, with stable performance and wide temperature.
| Model | CL532-2kHz-300μJ-ME001 |
| Wavelength(nm) | 532 |
| Repetition frequency (KHz) | 2 |
| Average power(mW) | 600 |
| Output energy (μJ) | 300 |
| Pulse width (ns) | 3 |
| Power stability (8h) | ±3% |
| Beam mode | TEM00 |
| Collimating spot diameter (mm) | ≈9 |
| Full divergence Angle Typ.(@1/e, mrad) | ≤1 |
| Polarization characteristics | >100:1 |
| Power input | 12V，>200W |
| External trigger control | Gated, 5V TIL, high level enabled |
| Laser head size (WxHxL.mm) | 60x39x158 |
| Operating temperature (℃, need to provide air cooling heat dissipation) | 15~35 |
| Storage temperature (℃) | -40~65 |
1. The external beam expanding function can be customized to meet the requirements of small divergence Angle (beam expanding mirror magnification 5-20X).
2. Control the temperature of the laser head. It is recommended that the temperature of the bottom plate be within the range of 15-35 ° C
- Pulse width 900ps, 3ns optional
- The repetition rate can reach 20kHz
- Fully sealed design, high reliability
- Compact structure, high-cost performance
- Glass, ceramic, gemstone, plastic marking
- Laser microprocessing
- Processing of brittle materials
532nm Microchip Laser System of MG Series
MG series high repetition rate microchip laser series is a semiconductor-pumped passive Q-switched solid-state laser with stable energy, narrow pulse width, good beam quality, and single longitudinal mode operation. This series of laser adopts hermetically sealed design, small size, easy installation and integration, and is widely used in the laser micromachining and analysis instrument industry. Our company can provide users with isolators and power amplification solutions that match the wavelength.
| Model | CL532-50KHz-0.8μJ-MG001 | CL532-100KHz-0.3μJ-MG002 |
| Wavelength(nm) | 532 | 532 |
| Repetition frequency (KHz) | 50** | 100** |
| Average power(mW) | 40 | 30 |
| Output energy(uJ) | 0.8 | 0.3 |
| Pulse width (ps) | 450 | 450 |
| Power stability (8h) | ±3% | ±3% |
| Beam mode | TEM00 | TEM00 |
| Full-angle divergence angle Typ. (Mrad) level @1/e2 | 24 | 32 |
| Vertical @1/e2 | 24 | 32 |
| Polarization characteristics | ＞100:1 | ＞100:1 |
| System power consumption（W) | ≤35 | ≤45 |
| Power input | 100-240 VAC,50/60Hz | 100-240 VAC,50/60Hz |
| Control interface | RS232、USB | RS232、USB |
| Power supply size (W×H×L, mm) | 168×88×140 | 168×88×140 |
| Laser head size (W×H×L, mm) | 45×33×120** | 45×33×120** |
| Working temperature (℃) | 15-35 | 15-35 |
| Storage temperature (℃) | 0-60 | 0-60 |
1. * the light outlet of the laser head is the side outlet. Please refer to the mechanical dimension drawing for details.
2. * * high PRF side light output structure, gated trigger, TTL 5V, SMA interface. Other structures are rising edges
- Maximum repetition frequency up to 100KHz
- Pulse energy up to 2.5µJ
- Single longitudinal mode
- Beam mode is TEM00
- Laser processing
- Seed source
- Analytical Instruments
- Biological photomolecule
532nm Microchip Laser System of MH Series
MH series high repetition rate microchip laser series can achieve high repetition rate while the pulse width is less than 300ps. The product is a passively Q-switched solid-state laser based on semiconductor pump, with stable energy, good beam quality and single longitudinal mode operation. The laser is designed with full seal, small size, convenient for user installation and integration. The system supports internal and external triggering and can be used for secondary development.
| Model | CL532-20KHz-1.5μJ-MH001 | CL532-50KHz-1μJ-MH002 | CL532-100KHz-0.3μJ-MH003 |
| Wavelength(nm) | 532 | 532 | 532 |
| Repetition frequency (KHz) | 20 | 50 | 100 |
| Average power(mW) | 30 | 50 | 30 |
| Output energy(uJ) | 1.5 | 1 | 0.3 |
| Pulse width (ps) | 300 | 300 | 450 |
| Power stability (8h) | ±3% | ±3% | ±3% |
| Beam mode | TEM00 | TEM00 | TEM00 |
| Full-angle divergence angle Typ. (Mrad) level @1/e2 | 16 | 16 | 25 |
| Vertical @1/e2 | 16 | 16 | 25 |
| Polarization characteristics | ＞100:1 | ＞100:1 | ＞100:1 |
| System power consumption（W) | ≤35 | ≤40 | ≤40 |
| Power input | 100-240 VAC,50/60Hz | 100-240 VAC,50/60Hz | 100-240 VAC,50/60Hz |
| Control interface | RS232、USB | RS232、USB | RS232、USB |
| Power supply size (W×H×L, mm) | 168×88×140 | 168×88×140 | 168×88×140 |
| Laser head size (W×H×L, mm) | 45×33×120 | 45×33×120 | 45×33×120 |
| Working temperature (℃) | 15-35 | 15-35 | 15-35 |
| Storage temperature (℃) | 0-60 | 0-60 | 0-60 |
1. This series of lasers with wavelengths of 355nm and 266nm can be customized.
2. Other frequencies can be customized.
- Pulse energy up to 32µJ
- Maximum repetition frequency up to 20KHz
- Beam mode is TEM00
- Laser micromachining
- Seed source
- Ultrasound imaging
- analytical chemistry
- Time-resolved Raman spectroscopy
- Biophotonics
532nm Microchip Laser System of MO Series
MO series microchip laser compact structure, plug, and play, can choose space output or fiber coupling two modes.
| Model | CL532-200Hz-30/25μJ-MO003 |
| Wavelength(nm) | 532 |
| Repetition frequency (Hz) | 1-200 |
| Maximum output energy of space beam (μJ) | 30 |
| Fiber Coupling Maximum Output Energy (μJ) | 25 |
| Pulse width (ns) | ≤1 |
| Energy Stability(rms) | ≤3% |
| Energy Regulation Step Accuracy | ≤2% |
| Beam mode (spatial beam output) | TEM00 |
| Full-angle divergence angle Typ. (Mrad) level @1/e2 | ≤2 |
| Vertical @1/e2 | ≤2 |
| Polarization characteristics | ≥100:1 |
| Fiber parameters (fiber coupled output optional) | 200μm/0.22NA |
| Power input | 24V DC |
| Modulation input | TTL0-5V,SMB connector |
| Control interface | RS232 |
| Power supply size (W×H×L, mm) | ＜20 |
| Laser head size (W×H×L, mm) | ＜10 |
| Laser head size (W × H × L, mm) | 82×79×190(space)/ 82x79x250(optical fiber) |
| Working temperature (℃) | 10-40 |
| Storage temperature (℃) | 0-60 |
1. The supported operating frequency is 16~200Hz in continuous mode and burst mode.
2. Fiber core diameter: 200μm.
3. The power supply adapter is shipped with matching power supply, which can support 90~260VAC power supply input.
- Laser engraving
- Laser luminescence
- Laser capture micro-cutting
- Laser mass spectrometry
- Raman spectroscopy detection
- Laser film engraving
- Acoustooptic imaging
- Laser remote sensing
- Pulse width < 1ns
- 1~200Hz frequency adjustable
- The laser energy can be adjusted on the machine
- Optical trigger output signal jitter < 100ps
- Fully sealed design, high reliability
Single Frequency Laser
The single frequency series laser includes single frequency continuous seed source, single frequency continuous amplification + frequency multiplier, single frequency high energy solid-state laser. Based on the non planar ring cavity technology, resonance detection technology, external cavity resonance frequency doubling technology and other engineering technology, the full parameter multi band laser product coverage from narrow linewidth seed source, excitation amplification to nonlinear frequency conversion is realized. By means of advanced engineering design means, the reliability and stability of products are effectively guaranteed in the light mechanical thermal integration analysis, automatic electronic control system development, etc. This series of products are widely used in lidar systems such as Doppler lidar, laser debris observation, laser remote sensing, etc., with the following technical advantages,
- Hyperspectral characteristics to meet the spectrum fine analysis
- High quality seed light injection, excellent power amplification
- Resonance detection technology ensures the single frequency characteristics of each pulse
- Frequency locking and stabilizing technology
The optical fiber + solid-state scheme can output 532nm green light of > 50W. It adopts PDH frequency locking technology, which is compact, stable and reliable.
532nm Single Frequency Pulsed Laser
| Model | Energy (mJ) | Energy Stability | Pulse Width(ns) | Repeat Frequency(Hz) | Spot Diameter @ 1/e2 |
| CL532-50mJ-SSL005 | 50 | ＜2% | ＜10 | 1-200 | ～3 |
| CL532-150mJ-SSL006 | 150 | ＜2.5% | ＜10 | 1-200 | ～4.5 |
| CL532-250mJ-SSL007 | 250 | ＜3% | ＜10 | 1-200 | ～6 |
| CL532-400mJ-SSL008 | 400 | ＜3% | ＜10 | 1-200 | ～8 |
| CL532-50mJ-SLL005 | 50 | ＜2% | ＜10 | 1-20 | ～3 |
| CL532-150mJ-SLL006 | 150 | ＜2.5% | ＜10 | 1-20 | ～4.5 |
| CL532-250mJ-SLL007 | 250 | ＜3% | ＜10 | 1-20 | ～6 |
| CL532-400mJ-SLL008 | 400 | ＜3% | ＜10 | 1-20 | ～8 |
- Single-mode output, good beam quality
- Light pump output, high cost performance
- Reliable structure, permanent fixing technology
- Highly integrated system, easy to operate
It is widely used in satellite laser ranging, Doppler wind measurement, underwater imaging, laser fine drilling, laser shock strengthening, nonlinear frequency conversion and other fields.
532nm Single Frequency Continuous Laser
| Model | CL532-30W-SFCL001 | |
| Optical Parameter | Central Wavelength (nm) | 532±1 |
| Output Power (W) | 5～30 | |
| Line Width (KHz) | ＜10 | |
| Frequency Stability (MHz@30min) | ＜3 | |
| Power Stability | ＜±0.5%@2h | |
| Power Adjustable Range | 10%-100% | |
| Beam Diameter（ 1/e2） | ＜2 | |
| Beam Quality M2 | ＜1.5 | |
| Beam Divergence Angle (mrad) | ＜0.5 | |
| Spectral Line Width (nm) | ＜±0.5 | |
| Polarization Extinction Ratio | ＞100:1 | |
| Function Parameter | Output Method | Spatial Light Output |
| Control Interface | DB9，RS422 | |
| Powered by | 220VAC/50Hz | |
| Output Power (W) | ＜300 | |
| Environmental Requirements | Operating Temperature (℃） | 0 ~ 30 |
| Storage Temperature (℃） | -10 ~ +60 | |
| Humidity | 0-80% | |
| Weight and Size | Laser Head Weight (Kg) | ＜15 |
| Power Weight (Kg) | ＜5 | |
| Laser Head Size | 444*232*150 | |
| Power Size | 2U |
- Front-end fiber + back-end solid frequency doubling
- Highly stable sigmoid resonator
- PDH frequency lock technology
- Wavelength can be extended
- Titanium sapphire pump
- Lidar
- Scientific research.
Q-Switched Laser
This series of products include active Q-switching and passive Q-switching microchip two technical solutions to generate sub nanosecond optical pulses, output sub nanosecond laser pulses while maintaining excellent beam quality. For the active Q-switched technology, the jitter of the output optical signal and the trigger signal is less than 1 ns, and for the passive Q-switched microchip laser, the jitter of the output signal and the external trigger signal is less than 10 μ s. The laser can be used alone or as seed source of laser amplifier. At the same time, the laser amplifier of our company can be used to amplify the energy to tens of MJ. At the same time, the wavelength can be extended to 532nm, 355nm, 266nm, etc. The product has the advantages of good beam quality, high peak power, reliable performance, compact structure, simple operation and maintenance. Combined with excellent production technology, this series of products can meet the requirements of airborne, vehicle mounted, high and low temperature and other harsh environments.
Main features of this series of lasers:Sub-nanosecond, high peak power;High beam quality;High stability and compact structure;Strong environmental adaptability, working at -20 ~ 60 ℃;1064nm, 532nm, 355nm wavelength optional;Typical application;Lidar;Laser micromachining;Nonlinear spectroscopy;Terahertz generation.
532nm Active Q-switched Sub Nanosecond Laser
Optical Parameter
| CL532-3mJ-AQNL001 | CL532-5mJ-AQNL002 | CL532-10mJ-AQNL003 | |
| Energy @532nm (mJ) | 3 | 5 | 10 |
| Energy Stability | ＜3% | ＜3% | ＜3% |
| Repeat Frequency (KHz) | 1～10 | 1～5 | 1～5 |
| Pulse Width (ns) | ＜1.5 | ＜1.5 | 8-10ns |
| Beam Quality M2 | ＜2 | ＜2 | ＜2 |
| Divergence (full angle) (mrad) | ＜1 | ＜1 | ＜1 |
| Spot diameter（1/e2）(mm) | ～2 | ～2 | ～4 |
Function Parameter
| CL532-3mJ-AQNL001 | CL532-5mJ-AQNL002 | CL532-10mJ-AQNL003 | |
| Control Interface | DB9，RS422 | DB9，RS422 | DB9，RS422 |
| Cooling Method | Water cooling | Water cooling | Water cooling |
| Powered By | 220VAC/50Hz | 220VAC/50Hz | 220VAC/50Hz |
Environmental Requirements
| CL532-3mJ-AQNL001 | CL532-5mJ-AQNL002 | CL532-10mJ-AQNL003 | |
| Operating Temperature (℃） | 15 ~ 30 | 15 ~ 30 | 15 ~ 30 |
| Storage Temperature (℃） | -10 ~ +50 | -10 ~ +50 | -10 ~ +50 |
| Humidity | 0-70% | 0-70% | 0-70% |
- Active Q
- Narrow pulse width and high peak power
- High stability and compact structure
- High beam quality
- Widely used in laser radar, point cloud imaging radar, ranging, laser remote sensing, photoelectric detection, laser fine processing and other fields.
532nm Passive Q-switched Sub Nanosecond Laser
Optical Parameter
| CL532-60μJ-PQNL004 | CL532-120μJ-PQNL005 | CL532-200μJ-PQNL006 | |
| Energy @532nm (uJ) | 60 | 120 | 200 |
| Energy Stability | ＜3% | ＜3% | ＜3% |
| Repeat Frequency (Hz) | 1～500 | 1～100 | 1～100 |
| Pulse Width (ns) | ＜1.5 | ＜1.5 | ＜1.5 |
Function Parameter
| CL532-60μJ-PQNL004 | CL532-120μJ-PQNL005 | CL532-200μJ-PQNL006 | |
| Control Interface | DB9，RS422 | DB9，RS422 | DB9，RS422 |
| Cooling Method | Air-cooled | Air-cooled | Air-cooled |
| Powered By | 220VAC/50Hz | 220VAC/50Hz | 220VAC/50Hz |
| Output Power (W) | ＜50 | ＜80 | ＜100 |
Environmental Requirements
| CL532-60μJ-PQNL004 | CL532-120μJ-PQNL005 | CL532-200μJ-PQNL006 | |
| Operating Temperature (℃） | 15 ~ 40 | 15 ~ 40 | 15 ~ 40 |
| Storage Temperature (℃） | -5 ~ +60 | -5 ~ +60 | -5 ~ +60 |
| Humidity | 0-70% | 0-70% | 0-70% |
Weight and Size
| CL532-60μJ-PQNL004 | CL532-120μJ-PQNL005 | CL532-200μJ-PQNL006 | |
| Laser Weight (Kg) | ＜10 | ＜12 | ＜10 |
| Laser Size (mm) | 441*117*96 | 480*120*96 | 441*117*96 |
- Structural design of passive Q-switched microchip
- Narrow pulse width, high peak power
- High stability and compact structure
- Integrated photodetector
Widely used in laser radar, point cloud imaging radar, ranging, laser remote sensing, photoelectric detection, laser fine processing and other fields.
532nm Dazzle Laser
The laser dazzler uses the 532nm green laser, which is the most sensitive to the human eye. When the eye is irradiated, it can make the eye temporarily blind and feel dizzy, thereby quickly suppressing the enemy without harming human life. Make the opponent’s instant attack or resistance invalid. This product is used for the customer’s long-distance laser refusal system.
| Model | CL532-10W-DAL001 | |
| Optical Parameter | Central Wavelength (nm) | 532 |
| Peak Output Power (W) | ＞10 | |
| Power Stability | ＜3% | |
| Power Adjustable Range | 10%-100% | |
| Output spot size | Design according to requirements | |
| Operating mode | Continuous / flashing | |
| Flicker frequency | 7-10Hz adjustable | |
| Function Parameter | Control interface | DB9, RS422 |
| cooling method | Air cooling | |
| powered by | 220VAC/28VDC | |
| Output power | ＜300W | |
| Environmental Requirements | Operating Temperature (℃） | -15 ~ 50 |
| Storage Temperature (℃） | -25 ~ +60 | |
| Humidity | 0-80% | |
| Weight and Size | Laser Head Weight (Kg) | 10 |
| Laser Head Size | 613*107*100mm |
- Compatible with customers’ overall structure, compact and reasonable design
- Auto focus function, adapt to rejection at different distances
- Strong environmental adaptability
- Simple and reliable operation
532nm Laser for Aerosol Radar
A matching light source for the customer’s atmospheric particulate lidar for real-time monitoring of local high-density pollution sources. The radar emits a 532nm laser, and the receiving telescope collects the backscattered signals of the aerosol and cloud. The receiver receives vertical and horizontal polarization signals at 532nm and signals in the blind zone, and analyzes its echo intensity and particle depolarization characteristics to achieve Zero-blind detection, distinguishing the distribution of particulate matter and the type of particulate matter.
| Model | CL532-500μJ-LAR001 | |
| Optical Parameter | Central Wavelength (nm) | 532 |
| Pulse Energy (uJ) | ≥450uJ@5kHz@10～35℃ ≥350uJ@5kHz@0～10℃&35～45℃ ≥200uJ@5kHz@-20～0℃&45～60℃ | |
| Power Stability | ≤2% | |
| Peak Power (kW) | ＞42 | |
| Beam Quality M2 | ＜1.3 | |
| Repeat Frequency (KHz) | 2-7khz adjustable, 5kHz by default | |
| Pulse Width | ≤13ns@5kHz | |
| Polarization Extinction Ratio | ＞100:1 | |
| Function Parameter | Service Life (h) | ＞10000 |
| Control Interface | 4PM terminal, RS232 communication protocol | |
| Cooling Method | TEC Refrigeration + Heat sink + Fan | |
| Powered by | 24VDC | |
| Output Power (W) | ＜260 | |
| Environmental Requirements | Operating Temperature (℃） | -20 ~ 60 |
| Storage Temperature (℃） | -30 ~ +70 | |
| Humidity | 0-80% | |
| Weight and Size | Laser Head Weight (Kg) | ＜9 |
| Laser Head Size | 326*110*104mm |
- Compatible with customer radar structure, compact and reasonable design
- Wide temperature use, working temperature -20-60 ℃
- 7 * 24 hours use, stable and reliable structure
- High protection level, anti-vibration design
Leave a Reply