1030-1080nm laser

1030nm Laser


1030nm-Laser -DPSSL CRYLINK

CRYLINK’s 1030 nm laser is 1030 nm Microchip Laser System of MJ Series. Its main applications are Material micromachining, Spectrum detection, Lidar, Pump source, Biomedical Science,etc.

1030nm Microchip Laser System of MJ Series 

MJ series microchip laser is a passively Q-switched solid-state laser based on semiconductor pump. The laser pulse is pure without tail, the single pulse energy is stable and the beam quality is good. The integrated design of semiconductor pump module and laser crystal makes the compact laser head easy to install and integrate. The system supports internal and external triggering. This series of products include two wavelengths of 1030nm and 515nm. The fully sealed module inside the laser head can be used by customers for secondary development and application.


Download PDF


Inquiry

Model and Parameter

Model Repetition Frequency Average Power Output Energy Pulse Width
CL1030-1KHz-100μJ-MJ008 1 kHz 100 mW 100 uJ 1 ns
CL1030-2KHz-80μJ-MJ009 2 kHz 160 mW 80 uJ 1 ns

Feature

  • Pulse width up to 1ns
  • Pulse energy up to 100μJ
  • Repetition frequency up to 2kHz
  • Beam mode is TEM00

Application

  • Material micromachining
  • Spectrum detection
  • Lidar
  • Pump source
  • Biomedical Science

1030-1080nm Single Frequency Fiber Laser

Single frequency fiber laser products are divided into single frequency continuous fiber laser and single frequency pulse fiber laser. After a long time of research and development and improvement, a unique product has been formed.

The single frequency continuous fiber laser series uses different types of low noise single frequency narrow linewidth laser as seed source, MOPA enlarges all fiber structure, through the optimization of engineering parameters of amplification stage, current noise suppression, high gain fiber nonlinear effect suppression, high power and low noise laser output is realized, maintaining the beam quality of high spectral signal-to-noise ratio and near diffraction limit. This series of products are widely used in laser coherent communication, atmospheric environment test, laser sensor, coherent synthesis and other test systems, with the following technical advantages:

  • Low Rin value is helpful to improve the precision of laser sensing and coherent communication;
  • High output power helps to improve the signal-to-noise ratio of atmospheric environment test


Download PDF


Inquiry

Model and Parameter

Model CL1030~1080-20W-SCFL001 CL1030~1080-50W-SCFL002
Optical
Parameter
Central Wavelength (nm) 1030~1080 1030~1080
Output Power (W) >20 >50
Power Stability <1% <2%
Power Adjustable Range 10%-100% 10%-100%
Beam Quality M2 <1.2 <1.2
Output Spectral Line Width (KHz) <100 <100
RIN Value (dB@1MHz) <-140 <-140
Polarization Extinction Ratio (dB) >20 >15
Function
Parameter
output Method FC/APC QBH collimation
Control Interface DB9,RS422 DB9,RS422
Cooling Method Air-cooled Water cooling
Powered By 220VAC/50Hz 220VAC/50Hz
Output Power (W) <300 <300
Environmental
Requirements
Operating Temperature -5-40 -5-40
Storage Temperature -10-60 -10-60
Humidity 0-80% 0-80%
Weight and Size Laser Head Weight (Kg) <30 <30
Power Weight (Kg) Photoelectric integrated <10
Laser Head Size (mm) 451*353*123 Customer settings
Power Size Customer settings

Feature

  • Narrow line width, low noise
  • All-fiber amplification structure
  • Input and output safety protection lock function
  • Simple operation and maintenance

Application

  • Laser coherence
  • adaptive optics
  • atmospheric environment detection
  • laser sensing
  • laser spectroscopy

Leave a Comment